2X18 TWIN VALVE W/ MANIFOLD WITHOUT ISOLATOR 216 M
![](/img/m/540.jpg)
Twins valve for 18 liters long cylinders (216 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve
Twins valve for 18 liters long cylinders (216 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve. Matt black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.
Manifold with isolation valve for twins mounting. Different measures depending on the cylinders of the set: 171 mm, 180 mm (aluminium) and 203 mm
Manifold with isolation valve for twins mounting. 171 mm for 10/12 long twins. Matt black finish of the military series.
Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins
Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm
Label your Nitrox tank to prevent inappropriate use.Includes all the fields for a perfect identification.
Knob for diving valve with opening indicator. When the tank is closed a red ring around appears, and when tank is open the ring is green.
Evo2 is the Cavitcleaner cavitation gun capable of removing any type of encrustation, from light encrustation to acorn shells and mussels. The Evo2 is easy to use, easy to use and among its strengths is safe use even for less experienced operators. It is available in several times: S, M, L. It is compatible with most high pressure machines.
Valve knob made of green rubber, with a length greater than the usual knobs for easy opening and closing. They are compatible with most of the axes of the valves. Very used to distinguish decompression and rebreathers oxygen tanks.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Neoprene taps with the diameter of the S80 cylinder, allows routing hoses and collect stage tanks easily during the dive. Also can be a protector for the hull of the tank against occasional bumps.